In the diagnosis of patellar instability, three-dimensional (3D) imaging enables measurement of a wide range of metrics. However, measuring these metrics can be time-consuming and prone to error due to conducting 2D measurements on 3D objects. This study aims to measure patellar tilt in 3D and automate it by utilizing a commercial AI algorithm for landmark placement. CT-scans of 30 patients with at least two dislocation events and 30 controls without patellofemoral disease were acquired. Patellar tilt was measured using three different methods: the established method, and by calculating the angle between 3D-landmarks placed by either a human rater or an AI algorithm. Correlations between the three measurements were calculated using interclass correlation coefficients, and differences with a Kruskal-Wallis test. Significant differences of means between patients and controls were calculated using Mann-Whitney U tests. Significance was assumed at 0.05 adjusted with the Bonferroni method. No significant differences (overall: p = 0.10, patients: 0.51, controls: 0.79) between methods were found. Predicted ICC between the methods ranged from 0.86 to 0.90 with a 95% confidence interval of 0.77-0.94. Differences between patients and controls were significant (p < 0.001) for all three methods. The study offers an alternative 3D approach for calculating patellar tilt comparable to traditional, manual measurements. Furthermore, this analysis offers evidence that a commercially available software can identify the necessary anatomical landmarks for patellar tilt calculation, offering a potential pathway to increased automation of surgical decision-making metrics.

Alzheimer's disease (AD) significantly threatens community well-being and healthcare resource allocation due to its high incidence and mortality. Therefore, early detection and intervention are crucial for reducing AD-related fatalities. However, the existing deep learning-based approaches often struggle to capture complex structural features of magnetic resonance imaging (MRI) data effectively. Common techniques for multi-scale feature fusion, such as direct summation and concatenation methods, often introduce redundant noise that can negatively affect model performance. These challenges highlight the need for developing more advanced methods to improve feature extraction and fusion, aiming to enhance diagnostic accuracy. This study proposes a multi-scale convolutional network and ensemble learning (MCNEL) framework for early and accurate AD diagnosis. The framework adopts enhanced versions of the EfficientNet-B0 and MobileNetV2 models, which are subsequently integrated with the DenseNet121 model to create a hybrid feature extraction tool capable of extracting features from multi-view slices. Additionally, a SimAM-based feature fusion method is developed to synthesize key feature information derived from multi-scale images. To ensure classification accuracy in distinguishing AD from multiple stages of cognitive impairment, this study designs an ensemble learning classifier model using multiple classifiers and a self-adaptive weight adjustment strategy. Extensive experiments on the Alzheimer's Disease Neuroimaging Initiative (ADNI) dataset validate the effectiveness of our solution, which achieves average accuracies of 96.67% for ADNI-1 and 96.20% for ADNI-2, respectively. The results indicate that the MCNEL outperforms recent comparable algorithms in terms of various evaluation metrics, demonstrating superior performance and robustness in AD diagnosis. This study markedly enhances the diagnostic capabilities for AD, allowing patients to receive timely treatments that can slow down disease progression and improve their quality of life.

Magnetic Resonance Imaging (MRI) has become a pivotal tool in diagnosing brain diseases, with a wide array of computer-aided artificial intelligence methods being proposed to enhance diagnostic accuracy. However, early studies were often limited by small-scale datasets and a narrow range of disease types, which posed challenges in model generalization. This study presents UniBrain, a hierarchical knowledge-enhanced pre-training framework designed for universal brain MRI diagnosis. UniBrain leverages a large-scale dataset comprising 24,770 imaging-report pairs from routine diagnostics for pre-training. Unlike previous approaches that either focused solely on visual representation learning or used brute-force alignment between vision and language, the framework introduces a hierarchical alignment mechanism. This mechanism extracts structured knowledge from free-text clinical reports at multiple granularities, enabling vision-language alignment at both the sequence and case levels, thereby significantly improving feature learning efficiency. A coupled vision-language perception module is further employed for text-guided multi-label classification, which facilitates zero-shot evaluation and fine-tuning of downstream tasks without modifying the model architecture. UniBrain is validated on both in-domain and out-of-domain datasets, consistently surpassing existing state-of-the-art diagnostic models and demonstrating performance on par with radiologists in specific disease categories. It shows strong generalization capabilities across diverse tasks, highlighting its potential for broad clinical application. The code is available at https://github.com/ljy19970415/UniBrain.

To evaluate the single and combined diagnostic performances of CT and MRI radiomics for diagnosis of acute pancreatitis (AP). We prospectively enrolled 78 patients (mean age 55.7 ± 17 years, 48.7 % male) diagnosed with AP between 2020 and 2022. Patients underwent contrast-enhanced CT (CECT) within 48-72 h of symptoms and MRI ≤ 24 h after CECT. The entire pancreas was manually segmented tridimensionally by two operators on portal venous phase (PVP) CECT images, T2-weighted imaging (WI) MR sequence and non-enhanced and PVP T1-WI MR sequences. A matched control group (n = 77) with normal pancreas was used. Dataset was randomly split into training and test, and various machine learning algorithms were compared. Receiver operating curve analysis was performed. The T2WI model exhibited significantly better diagnostic performance than CECT and non-enhanced and venous T1WI, with sensitivity, specificity and AUC of 73.3 % (95 % CI: 71.5-74.7), 80.1 % (78.2-83.2), and 0.834 (0.819-0.844) for T2WI (p = 0.001), 74.4 % (71.5-76.4), 58.7 % (56.3-61.1), and 0.654 (0.630-0.677) for non-enhanced T1WI, 62.1 % (60.1-64.2), 78.7 % (77.1-81), and 0.787 (0.771-0.810) for venous T1WI, and 66.4 % (64.8-50.9), 48.4 % (46-50.9), and 0.610 (0.586-0.626) for CECT, respectively.The combination of T2WI with CECT enhanced diagnostic performance compared to T2WI, achieving sensitivity, specificity and AUC of 81.4 % (80-80.3), 78.1 % (75.9-80.2), and 0.911 (0.902-0.920) (p = 0.001). The MRI radiomics outperformed the CT radiomics model to detect diagnosis of AP and the combination of MRI with CECT showed better performance than single models. The translation of radiomics into clinical practice may improve detection of AP, particularly MRI radiomics.

To develop a deep learning (DL) model based on ultrasound (US) images of lymph nodes for predicting cervical lymph node metastasis (CLNM) in postoperative patients with differentiated thyroid carcinoma (DTC). Retrospective collection of 352 lymph nodes from 330 patients with cytopathology findings between June 2021 and December 2023 at our institution. The database was randomly divided into the training and test cohort at an 8:2 ratio. The DL basic model of longitudinal and cross-sectional of lymph nodes was constructed based on ResNet50 respectively, and the results of the 2 basic models were fused (1:1) to construct a longitudinal + cross-sectional DL model. Univariate and multivariate analyses were used to assess US features and construct a conventional US model. Subsequently, a combined model was constructed by integrating DL and US. The diagnostic accuracy of the longitudinal + cross-sectional DL model was higher than that of longitudinal or cross-sectional alone. The area under the curve (AUC) of the combined model (US + DL) was 0.855 (95% CI, 0.767-0.942) and the accuracy, sensitivity, and specificity were 0.786 (95% CI, 0.671-0.875), 0.972 (95% CI, 0.855-0.999), and 0.588 (95% CI, 0.407-0.754), respectively. Compared with US and DL models, the integrated discrimination improvement and net reclassification improvement of the combined models are both positive. This preliminary study shows that the DL model based on US images of lymph nodes has a high diagnostic efficacy for predicting CLNM in postoperative patients with DTC, and the combined model of US+DL is superior to single conventional US and DL for predicting CLNM in this population. We innovatively used DL of lymph node US images to predict the status of cervical lymph nodes in postoperative patients with DTC.

Accurately evaluating bone mineral density (BMD) in patients with unilateral hip osteoarthritis (OA) is crucial for diagnosing osteoporosis and selecting implants for hip arthroplasty. Our goal was to measure the BMD differences between sides, examine contributing factors, and identify the optimal side for BMD assessment in these patients. We analyzed 108 women with unilateral hip OA. Bilateral hip BMD was assessed automatically through quantitative CT (QCT) utilizing a validated, deep-learning-based approach. We evaluated BMD variations between the OA and healthy hips across total, neck, and distal regions. To determine their contributions, we analyzed factors, including patient demographics, Crowe classification, Bombelli classification, knee OA status, hip functional score, and gluteal muscle volume and density. Furthermore, we examined how side-to-side BMD differences influenced osteoporosis diagnosis using T-scores based on QCT. The average BMD on the OA side was 6.9 % lower in the total region, 14.5 % higher in the neck region, and 9.4 % lower in the distal region than on the healthy side. Contributing factors to the reduced BMD in the OA hip included younger age, Bombelli classification (atrophic type), and significant gluteal muscle atrophy. Diagnoses from the OA side revealed lower sensitivity (61 %) than those from the healthy side (88 %). Analysis on one side alone yields a more precise osteoporosis diagnosis from the healthy side. Nonetheless, bilateral BMD assessment remains crucial, particularly in younger individuals and those with atrophic OA types. Although based on QCT, our findings support bilateral analysis by dual-energy X-ray absorptiometry for these patients.

The assessment of neoadjuvant treatment's response is critical for selecting the most suitable therapeutic options for patients with breast cancer to reduce the need for invasive local therapies. Breast magnetic resonance imaging (MRI) is so far one of the most accurate approaches for assessing pathological complete response, although this is limited by the qualitative and subjective nature of radiologists' assessment, often making it insufficient for deciding whether to forgo additional locoregional therapy measures. To increase the accuracy and prediction of radiomic MRI with the aid of machine learning models and deep learning methods, as part of artificial intelligence, have been used to analyse the different subtypes of breast cancer and the specific changes observed before and after therapy. This review discusses recent advancements in radiomic MRI models for presurgical response assessment for patients with early breast cancer receiving preoperative treatments, with a focus on their implications for clinical practice.

To evaluate the performance of a deep learning (DL) model in an external dataset to assess radiographic knee osteoarthritis using Kellgren-Lawrence (KL) grades against versatile human readers. Two-hundred-eight knee anteroposterior conventional radiographs (CRs) were included in this retrospective study. Four readers (three radiologists, one orthopedic surgeon) assessed the KL grades and consensus grade was derived as the mean of these. The DL model was trained using all the CRs from Multicenter Osteoarthritis Study (MOST) and validated on Osteoarthritis Initiative (OAI) dataset and then tested on our external dataset. To assess the agreement between the graders, Cohen's quadratic kappa (k) with 95 ​% confidence intervals were used. Diagnostic performance was measured using confusion matrices and receiver operating characteristic (ROC) analyses. The multiclass (KL grades from 0 to 4) diagnostic performance of the DL model was multifaceted: sensitivities were between 0.372 and 1.000, specificities 0.691-0.974, PPVs 0.227-0.879, NPVs 0.622-1.000, and AUCs 0.786-0.983. The overall balanced accuracy was 0.693, AUC 0.886, and kappa 0.820. If only dichotomous KL grading (i.e. KL0-1 vs. KL2-4) was utilized, superior metrics were seen with an overall balanced accuracy of 0.902 and AUC of 0.967. A substantial agreement between each reader and DL model was found: the inter-rater agreement was 0.737 [0.685-0.790] for the radiology resident, 0.761 [0.707-0.816] for the musculoskeletal radiology fellow, 0.802 [0.761-0.843] for the senior musculoskeletal radiologist, and 0.818 [0.775-0.860] for the orthopedic surgeon. In an external dataset, our DL model can grade knee osteoarthritis with diagnostic accuracy comparable to highly experienced human readers.

Cone-beam computed tomography (CBCT) is widely used in radiotherapy to image patient configuration before treatment but its image quality is lower than planning CT due to scattering, motion, and reconstruction methods. This reduces the accuracy of Hounsfield units (HU) and limits its use in adaptive radiation therapy (ART). However, synthetic CT (sCT) generation using deep learning methods for CBCT intensity correction faces challenges due to deformation. To address these issues, we propose enhancing CBCT quality using a conditional denoising diffusion probability model (CDDPM), which is trained on pseudo-CBCT created by adding pseudo-scatter to planning CT. The CDDPM transforms CBCT into high-quality sCT, improving HU accuracy while preserving anatomical configuration. The performance evaluation of the proposed sCT showed a reduction in mean absolute error (MAE) from 81.19 HU for CBCT to 24.89 HU for the sCT. Peak signal-to-noise ratio (PSNR) improved from 31.20 dB for CBCT to 33.81 dB for the sCT. The Dice and Jaccard coefficients between CBCT and sCT for the colon, prostate, and bladder ranged from 0.69 to 0.91. When compared to other deep learning models, the proposed sCT outperformed them in terms of accuracy and anatomical preservation. The dosimetry analysis for prostate cancer revealed a dose error of over 10% with CBCT but nearly 0% with the sCT. Gamma pass rates for the proposed sCT exceeded 90% for all dose criteria, indicating high agreement with CT-based dose distributions. These results show that the proposed sCT improves image quality, dosimetry accuracy, and treatment planning, advancing ART for pelvic cancer.

We aimed to develop and validate an Artificial Intelligence (AI) model that leverages CCTA and optical coherence tomography (OCT) images for automated analysis of plaque characteristics and coronary function. A total of 100 patients who underwent invasive coronary angiography, OCT, and CCTA before discharge were included in this study. The data were randomly divided into a training set (80 %) and a test set (20 %). The training set, comprising 21,471 tomography images, was used to train a deep-learning convolutional neural network. Subsequently, the AI model was integrated with flow reserve score calculation software developed by Ruixin Medical. The results from the test set demonstrated excellent agreement between the AI model and OCT analysis for calcified plaque (McNemar test, p = 0.683), non-calcified plaque (McNemar test, p = 0.752), mixed plaque (McNemar test, p = 1.000), and low-attenuation plaque (McNemar test, p = 1.000). Additionally, there was excellent agreement for deep learning-derived minimum lumen diameter (intraclass correlation coefficient [ICC] 0.91, p < 0.001), mean vessel diameter (ICC 0.88, p < 0.001), and percent diameter stenosis (ICC 0.82, p < 0.001). In diagnosing >50 % coronary stenosis, the diagnostic accuracy of the AI model surpassed that of conventional CCTA (AUC 0.98 vs. 0.76, p = 0.008). When compared with quantitative flow fraction, there was excellent agreement between QFR and AI-derived CT-FFR (ICC 0.745, p < 0.0001). Our AI model effectively provides automated analysis of plaque characteristics from CCTA images, with the analysis results showing strong agreement with OCT findings. Moreover, the CT-FFR automatically analyzed by the AI model exhibits high consistency with QFR derived from coronary angiography.