To investigate the feasibility of accelerated MRI with artificial intelligence-assisted compressed sensing (ACS) technique in the temporomandibular joint (TMJ) and compare its performance with parallel imaging (PI) protocol and standard (STD) protocol. Participants with TMJ-related symptoms were prospectively enrolled from April 2023 to May 2024, and underwent bilateral TMJ imaging examinations using ACS protocol (6:08 min), PI protocol (10:57 min), and STD protocol (13:28 min). Overall image quality and visibility of TMJ relevant structures were qualitatively evaluated by a 4-point Likert scale. Quantitative analysis of signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) of TMJ disc, condyle, and lateral pterygoid muscle (LPM) was performed. Diagnostic agreement of joint effusion and disc displacement among protocols and investigators was assessed by Fleiss' kappa analysis. A total of 51 participants (16 male and 35 female) with 102 TMJs were included. The overall image quality and most structures of the ACS protocol were significantly higher than the STD protocol (all p < 0.05), and similar to the PI protocol. For quantitative analysis, the ACS protocol demonstrated significantly higher SNR and CNR than the STD protocol in the TMJ disc, condyle, and LPM (all p < 0.05), and the ACS protocol showed comparable SNR to the PI protocol in most sequences. Good to excellent inter-protocol and inter-observer agreement was observed for diagnosing TMJ abnormalities (κ = 0.699-1.000). Accelerated MRI with ACS technique can significantly reduce the acquisition time of TMJ, while providing superior or equivalent image quality and great diagnostic agreement with PI and STD protocols. Question Patients with TMJ disorders often cannot endure long MRI examinations due to orofacial pain, necessitating accelerated MRI to improve patient comfort. Findings ACS technique can significantly reduce acquisition time in TMJ imaging while providing superior or equivalent image quality. Clinical relevance The time-saving ACS technique improves image quality and achieves excellent diagnostic agreement in the evaluation of joint effusion and disc displacement. It helps optimize clinical MRI workflow in patients with TMJ disorders.

Dental implant surgery has become a prevalent treatment option for patients with single tooth defects. However, the success of this surgery relies heavily on precise planning and execution. This study investigates the application of artificial intelligence (AI) in assisting the planning process of dental implant surgery for single tooth defects. Single tooth defects in the oral cavity pose a significant challenge in restorative dentistry. Dental implant restoration has emerged as an effective solution for rehabilitating such defects. However, the complexity of the procedure and the need for accurate treatment planning necessitate the integration of advanced technologies. In this study, we propose the utilisation of AI to enhance the precision and efficiency of implant surgery planning for single tooth defects. A total of twenty patients with single tooth loss were enrolled. Cone-beam computed tomography (CBCT) and intra-oral scans were obtained and imported into the AI-dentist software for 3D reconstruction. AI assisted in implant selection, tooth position identification, and crown fabrication. Evaluation included subjective verification and objective assessments. A paired samples t-test was used to compare planning times (dentist vs. AI), with a significance level of p < 0.05. Twenty patients (9 male, 11 female; mean age 59.5 ± 11.86 years) with single missing teeth participated in this study. Implant margins were carefully positioned: 3.05 ± 1.44 mm from adjacent roots, 2.52 ± 0.65 mm from bone plate edges, 3.05 ± 1.44 mm from sinus/canal, and 3.85 ± 1.23 mm from gingival height. Manual planning (21.50 ± 4.87 min) was statistically significantly slower than AI (11.84 ± 3.22 min, p < 0.01). Implant planning met 100% buccolingual/proximal/distal bone volume criteria and 90% sinus/canal distance criteria. Two patients required sinus lifting and bone grafting due to insufficient bone volume. This study highlights the promising role of AI in enhancing the precision and efficiency of dental implant surgery planning for single tooth defects. Further studies are necessary to validate the effectiveness and safety of AI-assisted planning in a larger patient population.

We developed an automated photoacoustic and ultrasound breast tomography system that images the patient in the standing pose. The system, named OneTouch-PAT, utilized linear transducer arrays with optical-acoustic combiners for effective dual-modal imaging. During scanning, subjects only need to gently attach their breasts to the imaging window, and co-registered three-dimensional ultrasonic and photoacoustic images of the breast can be obtained within one minute. Our system has a large field of view of 17 cm by 15 cm and achieves an imaging depth of 3 cm with sub-millimeter resolution. A three-dimensional deep-learning network was also developed to further improve the image quality by improving the 3D resolution, enhancing vasculature, eliminating skin signals, and reducing noise. The performance of the system was tested on four healthy subjects and 61 patients with breast cancer. Our results indicate that the ultrasound structural information can be combined with the photoacoustic vascular information for better tissue characterization. Representative cases from different molecular subtypes have indicated different photoacoustic and ultrasound features that could potentially be used for imaging-based cancer classification. Statistical analysis among all patients indicates that the regional photoacoustic intensity and vessel branching points are indicators of breast malignancy. These promising results suggest that our system could significantly enhance breast cancer diagnosis and classification.

Colonoscopy is a mainstay of colorectal cancer screening and has helped to lower cancer incidence and mortality. The resection of polyps during colonoscopy is critical for tissue diagnosis and prevention of colorectal cancer, albeit resulting in increased resource requirements and expense. Discarding resected benign polyps without sending for histopathological processing and confirmatory diagnosis, known as the resect and discard strategy, could enhance efficiency but is not commonly practiced due to endoscopists predominant preference for pathological confirmation. The inaccessibility of histopathology from unprocessed resected tissue hampers endoscopic decisions. We show that intraprocedural fibre-optic microscopy with ultraviolet-C surface excitation (FUSE) of polyps post-resection enables rapid diagnosis, potentially complementing endoscopic interpretation and incorporating pathologist oversight. In a clinical study of 28 patients, slide-free FUSE microscopy of freshly resected polyps yielded mucosal views that greatly magnified the surface patterns observed on endoscopy and revealed previously unavailable histopathological signatures. We term this new cross-specialty readout surface histology. In blinded interpretations of 42 polyps (19 training, 23 reading) by endoscopists and pathologists of varying experience, surface histology differentiated normal/benign, low-grade dysplasia, and high-grade dysplasia and cancer, with 100% performance in classifying high/low risk. This FUSE dataset was also successfully interpreted by foundation AI models pretrained on histopathology slides, illustrating a new potential for these models to not only expedite conventional pathology tasks but also autonomously provide instant expert feedback during procedures that typically lack pathologists. Surface histology readouts during colonoscopy promise to empower endoscopist decisions and broadly enhance confidence and participation in resect and discard. One Sentence SummaryRapid microscopy of resected polyps during colonoscopy yielded accurate diagnoses, promising to enhance colorectal screening.

<b>Background:</b> Studies of artificial intelligence (AI) for lung nodule detection on CT have primarily been conducted in investigational settings and/or focused on lung cancer screening. <b>Objective:</b> To evaluate the impact of AI assistance on radiologists' diagnostic performance for detecting lung metastases on chest CT in patients with colorectal cancer (CRC) in real-world clinical practice and to assess the clinical utility of AI assistance in this setting. <b>Methods:</b> This retrospective study included patients with CRC who underwent chest CT as surveillance for lung metastasis from May 2020 to December 2020 (conventional interpretation) or May 2022 to December 2022 (AI-assisted interpretation). Between periods, the institution implemented a commercial AI lung nodule detection system. During the second period, radiologists interpreted examinations concurrently with AI-generated reports, using clinical judgment regarding whether to report AI-detected nodules. The reference standard for metastasis incorporated pathologic and clinical follow-up criteria. Diagnostic performance (sensitivity, specificity, accuracy), and clinical utility (diagnostic yield, false-referral rate, management changes after positive reports) were compared between groups based on clinical radiology reports. Net benefit was estimated using decision curve analysis equation. Standalone AI interpretation was evaluated. <b>Results:</b> The conventional interpretation group included 647 patients (mean age, 64±11 years; 394 men, 253 women; metastasis prevalence, 4.3%); AI-assisted interpretation group included 663 patients (mean age, 63±12 years; 381 men, 282 women; metastasis prevalence, 4.4%). The AI-assisted interpretation group compared with the conventional interpretation group showed higher sensitivity (72.4% vs 32.1%; p=.008), accuracy (98.5% vs 96.0%; p=.005), and frequency of management changes (55.2% vs 25.0%, p=.02), without significant difference in specificity (99.7% vs 98.9%; p=.11), diagnostic yield (3.2% vs 1.4%, p=.30) or false-referral rate (0.3% vs 1.1%, p=.10). AI-assisted interpretation had positive estimated net benefit across outcome ratios. Standalone AI correctly detected metastasis in 24 of 29 patients but had 381 false-positive detections in 634 patients without metastasis; only one AI false-positive was reported as positive by interpretating radiologists. <b>Conclusion:</b> AI assistance yielded increased sensitivity, accuracy, and frequency of management changes, without significantly changed specificity. False-positive AI results minimally impacted radiologists' interpretations. <b>Clinical Impact:</b> The findings support clinical utility of AI assistance for CRC metastasis surveillance.

Chronic obstructive pulmonary disease (COPD) is one of the leading causes of morbidity and mortality in China, highlighting the importance of early diagnosis and ongoing monitoring for effective management. In recent years, hyperpolarized 129Xe MRI technology has gained significant clinical attention due to its ability to non-invasively and visually assess lung ventilation, microstructure, and gas exchange function. Its recent clinical approval in China, the United States and several European countries, represents a significant advancement in pulmonary imaging. This review provides an overview of the latest developments in hyperpolarized 129Xe MRI technology for COPD assessment in China. It covers the progress in instrument development, advanced imaging techniques, artificial intelligence-driven reconstruction methods, molecular imaging, and the application of this technology in both COPD patients and animal models. Furthermore, the review explores potential technical innovations in 129Xe MRI and discusses future directions for its clinical applications, aiming to address existing challenges and expand the technology's impact in clinical practice.

Robotic central pancreatectomy is increasingly used for pre- or low-grade malignant tumors in the pancreatic body balancing preservation of pancreatic function while removing the target lesion.^1-3 Today, there is no established reconstruction method and high rates of postpancreatectomy fistulas (POPF) remain a significant concern. ^4,5 We developed novel technique involving transgastric pancreaticogastrostomy with an omental pedicle advancement flap to reduce the risk of POPF. Additionally, preoperative deep-learning 3D organ modeling plays a crucial role in enhancing spatial understanding to enhance procedural safety.^6,7 METHODS: A 76-year-old female patient with a 33-mm, biopsy-confirmed high-risk IPMN underwent robotic-assisted central pancreatectomy. Preoperative CT was processed with a deep-learning system to create a patient-specific 3D model, enabling virtual simulation of port configurations. The optimal setup was selected based on the spatial relationship between port site, tumor location, and anatomy A transgastric pancreaticogastrostomy with omental flap reinforcement was performed to reduce POPF leading to a simpler reconstruction compared to pancreaticojejunostomy. The procedure lasted 218 min with minimal blood loss (50 ml). No complications occurred, and the patient was discharged on postoperative Day 3 after drain removal. Final pathology showed low-grade dysplasia. This approach, facilitated by robotic assistance, effectively preserves pancreatic function while treating a low-grade malignant tumor. Preoperative 3D organ modeling enhances the spatial understanding with the goal to increase procedural safety. Finally, the omental pedicle advancement flap technique shows promise in possibly reducing the incidence or at least the impact of POPF.

This study aims to determine the diagnostic performance of sub-5-min combined sixfold parallel imaging (PIx3)-simultaneous multislice (SMSx2)-accelerated deep learning (DL) super-resolution 3T knee MRI in children and adolescents. Children with painful knee conditions who underwent PIx3-SMSx2-accelerated DL super-resolution 3T knee MRI and arthroscopy between October 2022 and December 2023 were retrospectively included. Nine fellowship-trained musculoskeletal radiologists independently scored the MRI studies for image quality and the presence of artifacts (Likert scales, range: 1 = very bad/severe, 5 = very good/absent), as well as structural abnormalities. Interreader agreements and diagnostic performance testing was performed. Forty-four children (mean age: 15 ± 2 years; range: 9-17 years; 24 boys) who underwent knee MRI and arthroscopic surgery within 22 days (range, 2-133) were evaluated. Overall image quality was very good (median rating: 5 [IQR: 4-5]). Motion artifacts (5 [5-5]) and image noise (5 [4-5]) were absent. Arthroscopy-verified abnormalities were detected with good or better interreader agreement (κ ≥ 0.74). Sensitivity, specificity, accuracy, and AUC values were 100%, 84%, 93%, and 0.92, respectively, for anterior cruciate ligament tears; 71%, 97%, 93%, and 0.84 for medial meniscus tears; 65%, 100%, 86%, and 0.82 for lateral meniscus tears; 100%, 100%, 100%, and 1.00 for discoid lateral menisci; 100%, 95%, 96%, and 0.98 for medial patellofemoral ligament tears; and 55%, 100%, 98%, and 0.77 for articular cartilage defects. Clinical sub-5-min PIx3-SMSx2-accelerated DL super-resolution 3T knee MRI provides excellent image quality and high diagnostic performance for diagnosing internal derangement in children and adolescents.

Brain aneurysm detection models, both in the literature and in industry, continue to lack generalizability during external validation, limiting clinical adoption. This challenge is largely due to extensive exclusion criteria during training data selection. The authors developed the first model to achieve generalizability using novel methodological approaches. Computed tomography angiography (CTA) scans from 2004 to 2023 at the study institution were used for model training, including untreated unruptured intracranial aneurysms without extensive cerebrovascular disease. External validation used digital subtraction angiography-verified CTAs from an international center, while prospective validation occurred at the internal institution over 9 months. A public web platform was created for further model validation. A total of 2194 CTA scans were used for this study. One thousand five hundred eighty-seven patients and 1920 aneurysms with a mean size of 5.3 ± 3.7 mm were included in the training cohort. The mean age of the patients was 69.7 ± 14.9 years, and 1203 (75.8%) were female. The model achieved a training Dice score of 0.88 and a validation Dice score of 0.76. Prospective internal validation on 304 scans yielded a lesion-level (LL) sensitivity of 82.5% (95% CI: 75.5-87.9) and specificity of 89.6 (95% CI: 84.5-93.2). External validation on 303 scans demonstrated an on-par LL sensitivity and specificity of 83.5% (95% CI: 75.1-89.4) and 92.9% (95% CI: 88.8-95.6), respectively. Radiologist LL sensitivity from the external center was 84.5% (95% CI: 76.2-90.2), and 87.5% of the missed aneurysms were detected by the model. The authors developed the first publicly testable artificial intelligence model for aneurysm detection on CTA scans, demonstrating generalizability and state-of-the-art performance in external validation. The model addresses key limitations of previous efforts and enables broader validation through a web-based platform.

The purpose of this study is to evaluate the diagnostic accuracy of an artificial intelligence (AI)-based Computer-Aided Diagnosis (CADx) system for breast ultrasound, compare its performance with radiologists, and assess the effect of AI-assisted diagnosis. This study aims to investigate the system's ability to differentiate between benign and malignant breast masses among Japanese patients. This retrospective study included 171 breast mass ultrasound images (92 benign, 79 malignant). The AI system, BU-CAD™, provided Breast Imaging Reporting and Data System (BI-RADS) categorization, which was compared with the performance of three radiologists. Diagnostic accuracy, sensitivity, specificity, and area under the curve (AUC) were analyzed. Radiologists' diagnostic performance with and without AI assistance was also compared, and their reading time was measured using a stopwatch. The AI system demonstrated a sensitivity of 91.1%, specificity of 92.4%, and an AUC of 0.948. It showed comparable diagnostic performance to Radiologist 1, with 10 years of experience in breast imaging (0.948 vs. 0.950; p = 0.893), and superior performance to Radiologist 2 (7 years of experience, 0.948 vs. 0.881; p = 0.015) and Radiologist 3 (3 years of experience, 0.948 vs. 0.832; p = 0.001). When comparing diagnostic performance with and without AI, the use of AI significantly improved the AUC for Radiologists 2 and 3 (p = 0.001 and 0.005, respectively). However, there was no significant difference for Radiologist 1 (p = 0.139). In terms of diagnosis time, the use of AI reduced the reading time for all radiologists. Although there was no significant difference in diagnostic performance between AI and Radiologist 1, the use of AI substantially decreased the diagnosis time for Radiologist 1 as well. The AI system significantly improved diagnostic efficiency and accuracy, particularly for junior radiologists, highlighting its potential clinical utility in breast ultrasound diagnostics.