The aim of the study was to compare the diagnostic quality of deep learning (DL) reconstructed balanced steady-state free precession (bSSFP) single-shot (SSH) cine images with standard, multishot (also: segmented) bSSFP cine (standard cine) in cardiac MRI. This prospective study was performed in a cohort of participants with clinical indication for cardiac MRI. SSH compressed-sensing bSSFP cine and standard multishot cine were acquired with breath-holding and electrocardiogram-gating in short-axis view at 1.5 Tesla. SSH cine images were reconstructed using an industry-developed DL super-resolution algorithm (DL-SSH cine). Two readers evaluated diagnostic quality (endocardial edge definition, blood pool to myocardium contrast and artifact burden) from 1 (nondiagnostic) to 5 (excellent). Functional left ventricular (LV) parameters were assessed in both sequences. Edge rise distance, apparent signal-to-noise ratio (aSNR) and contrast-to-noise ratio were calculated. Statistical analysis for the comparison of DL-SSH cine and standard cine included the Student's t-test, Wilcoxon signed-rank test, Bland-Altman analysis, and Pearson correlation. Forty-five participants (mean age: 50 years ±18; 30 men) were included. Mean total scan time was 65% lower for DL-SSH cine compared to standard cine (92 ± 8 s vs 265 ± 33 s; P  < 0.0001). DL-SSH cine showed high ratings for subjective image quality (eg, contrast: 5 [interquartile range {IQR}, 5-5] vs 5 [IQR, 5-5], P  = 0.01; artifacts: 4.5 [IQR, 4-5] vs 5 [IQR, 4-5], P  = 0.26), with superior values for sharpness parameters (endocardial edge definition: 5 [IQR, 5-5] vs 5 [IQR, 4-5], P  < 0.0001; edge rise distance: 1.9 [IQR, 1.8-2.3] vs 2.5 [IQR, 2.3-2.6], P  < 0.0001) compared to standard cine. No significant differences were found in the comparison of objective metrics between DL-SSH and standard cine (eg, aSNR: 49 [IQR, 38.5-70] vs 52 [IQR, 38-66.5], P  = 0.74). Strong correlation was found between DL-SSH cine and standard cine for the assessment of functional LV parameters (eg, ejection fraction: r = 0.95). Subgroup analysis of participants with arrhythmia or unreliable breath-holding (n = 14/45, 31%) showed better image quality ratings for DL-SSH cine compared to standard cine (eg, artifacts: 4 [IQR, 4-5] vs 4 [IQR, 3-5], P  = 0.04). DL reconstruction of SSH cine sequence in cardiac MRI enabled accelerated acquisition times and noninferior diagnostic quality compared to standard cine imaging, with even superior diagnostic quality in participants with arrhythmia or unreliable breath-holding.

Medical Image plays a vital role in diagnosis, but noise in patient scans severely affects the accuracy and quality of images. Denoising methods are important to increase the clarity of these images, particularly in low-resource settings where current diagnostic roles are inaccessible. Pneumonia is a widespread disease that presents significant diagnostic challenges due to the high similarity between its various types and the lack of medical images for emerging variants. This study introduces a novel Diffusion with swin transformer-based Optimized Crow Search algorithm to increase the image's quality and reliability. This technique utilizes four datasets such as brain tumor MRI dataset, chest X-ray image, chest CT-scan image, and BUSI. The preprocessing steps involve conversion to grayscale, resizing, and normalization to improve image quality in medical image (MI) datasets. Gaussian noise is introduced to further enhance image quality. The method incorporates a diffusion process, swin transformer networks, and optimized crow search algorithm to improve the denoising of medical images. The diffusion process reduces noise by iteratively refining images while swin transformer captures complex image features that help differentiate between noise and essential diagnostic information. The crow search optimization algorithm fine-tunes the hyperparameters, which minimizes the fitness function for optimal denoising performance. The method is tested across four datasets, indicating its optimal effectiveness against other techniques. The proposed method achieves a peak signal-to-noise ratio of 38.47 dB, a structural similarity index measure of 98.14%, a mean squared error of 0.55, and a feature similarity index measure of 0.980, which outperforms existing techniques. These outcomes reflect that the proposed approach effectively enhances the quality of images, resulting in precise and dependable diagnoses.

Cardiac motion artifacts frequently degrade the quality and interpretability of coronary computed tomography angiography (CCTA) images, making it difficult for radiologists to identify and evaluate the details of the coronary vessels accurately. In this paper, a deep learning-based approach for coronary artery motion compensation, namely a temporal-weighted motion correction network (TW-MoCoNet), was proposed. Firstly, the motion data required for TW-MoCoNet training were generated using a motion artifact simulation method based on the original no-artifact CCTA images. Secondly, TW-MoCoNet, consisting of a temporal weighting correction module and a differentiable spatial transformer module, was trained using these generated paired images. Finally, the proposed method was evaluated on 67 clinical data with objective metrics including peak signal-to-noise ratio (PSNR), structural similarity index (SSIM), fold-overlap ratio (FOR), low-intensity region score (LIRS), and motion artifact score (MAS). Additionally, subjective image quality was evaluated using a 4-point Likert scale to assess visual improvements. The experimental results demonstrated a substantial improvement in both the objective and subjective evaluations of image quality after motion correction was applied. The proportion of the segments with moderate artifacts, scored 2 points, has a notable decrease of 80.2% (from 26.37 to 5.22%), and the proportion of artifact-free segments (scored 4 points) has reached 50.0%, which is of great clinical significance. In conclusion, the deep learning-based motion correction method proposed in this paper can effectively reduce motion artifacts, enhance image clarity, and improve clinical interpretability, thus effectively assisting doctors in accurately identifying and evaluating the details of coronary vessels.

In computed tomography (CT), non-uniform detector responses often lead to ring artifacts in reconstructed images. For conventional energy-integrating detectors (EIDs), such artifacts can be effectively addressed through dead-pixel correction and flat-dark field calibration. However, the response characteristics of photon-counting detectors (PCDs) are more complex, and standard calibration procedures can only partially mitigate ring artifacts. Consequently, developing high-performance ring artifact removal algorithms is essential for PCD-based CT systems. To this end, we propose the Inter-slice Complementarity Enhanced Ring Artifact Removal (ICE-RAR) algorithm. Since artifact removal in the central region is particularly challenging, ICE-RAR utilizes a dual-branch neural network that could simultaneously perform global artifact removal and enhance the central region restoration. Moreover, recognizing that the detector response is also non-uniform in the vertical direction, ICE-RAR suggests extracting and utilizing inter-slice complementarity to enhance its performance in artifact elimination and image restoration. Experiments on simulated data and two real datasets acquired from PCD-based CT systems demonstrate the effectiveness of ICE-RAR in reducing ring artifacts while preserving structural details. More importantly, since the system-specific characteristics are incorporated into the data simulation process, models trained on the simulated data can be directly applied to unseen real data from the target PCD-based CT system, demonstrating ICE-RAR's potential to address the ring artifact removal problem in practical CT systems. The implementation is publicly available at https://github.com/DarkBreakerZero/ICE-RAR.

Deep learning has demonstrated remarkable efficacy in reconstructing low-count PET (Positron Emission Tomography) images, attracting considerable attention in the medical imaging community. However, most existing deep learning approaches have not fully exploited the unique physical characteristics of PET imaging in the design of fidelity and prior regularization terms, resulting in constrained model performance and interpretability. In light of these considerations, we introduce an unrolled deep network based on maximum likelihood estimation for the Poisson distribution and a Generalized domain transformation for Sparsity learning, dubbed GS-Net. To address this complex optimization challenge, we employ the Alternating Direction Method of Multipliers (ADMM) framework, integrating a modified Expectation Maximization (EM) approach to address the primary objective and utilize the shrinkage thresholding approach to optimize the L1 norm term. Additionally, within this unrolled deep network, all hyperparameters are adaptively adjusted through end-to-end learning to eliminate the need for manual parameter tuning. Through extensive experiments on simulated patient brain datasets and real patient whole-body clinical datasets with multiple count levels, our method has demonstrated advanced performance compared to traditional non-iterative and iterative reconstruction, deep learning-based direct reconstruction, and hybrid unrolled methods, as demonstrated by qualitative and quantitative evaluations.

To propose and evaluate an optimized MP-RAGE protocol for rapid T₁-weighted imaging of the brain at 0.55 T. Incoherent and coherent steady state free precession (SSFP) RAGE kernels with constant and variable excitation angles were investigated in terms of the white matter SNR and the white matter-gray matter signal difference. Potential edge smearing from the transient signal readout was assessed based on a differential point spread function analysis. Finally, the prospects of a deep-learning reconstruction (DLR) method for accelerated MP-RAGE MRI of undersampled data were evaluated for the best performing variant. MP-RAGE imaging with a variable flip angle (vFA) SSFP-FID kernel outperformed all other investigated variants. As compared to the standard MPRAGE sequence using a spoiled gradient echo kernel with constant flip angle, vFA SSFP-FID offered an average gain in the white matter SNR of 21% ± 2% and an average improvement for the white matter-gray matter signal difference for cortical gray matter of 47% ± 7%. The differential point spread function was narrowest for the spoiled gradient echo but slightly increased by 8% for vFA SSFP-FID. For vFA SSFP-FID, DLR offered a considerable decrease in the overall scan time from 5:17 min down to 2:46 min without noticeable image artifacts and degradations. At 0.55 T, a vFA MP-RAGE variant using an SSFP-FID kernel combined with a DLR method offers excellent prospects for rapid T₁-weighted whole brain imaging in less than 3 min with nearly 1 mm (1.12 × 1.17 × 1.25 mm³) isotropic resolution.

Current models based on deep learning for low-dose CT denoising rely heavily on paired data and generalize poorly. Even the more concerned diffusion models need to learn the distribution of clean data for reconstruction, which is difficult to satisfy in medical clinical applications. At the same time, self-supervised-based methods face the challenge of significant degradation of generalizability of models pre-trained for the current dose to expand to other doses. To address these issues, this paper proposes a novel method of tunable-generalization diffusion powered by self-supervised contextual sub-data for low-dose CT reconstruction, named SuperDiff. Firstly, a contextual subdata similarity adaptive sensing strategy is designed for denoising centered on the LDCT projection domain, which provides an initial prior for the subsequent progress. Subsequently, the initial prior is used to combine knowledge distillation with a deep combination of latent diffusion models for optimizing image details. The pre-trained model is used for inference reconstruction, and the pixel-level self-correcting fusion technique is proposed for fine-grained reconstruction of the image domain to enhance the image fidelity, using the initial prior and the LDCT image as a guide. In addition, the technique is flexibly applied to the generalization of upper and lower doses or even unseen doses. Dual-domain strategy cascade for self-supervised LDCT denoising, SuperDiff requires only LDCT projection domain data for training and testing. Full qualitative and quantitative evaluations on both datasets and real data show that SuperDiff consistently outperforms existing state-of-the-art methods in terms of reconstruction and generalization performance.

While diffusion models have set a new benchmark for quality in Low-Dose Computed Tomography (LDCT) denoising, their clinical adoption is critically hindered by extreme computational costs, with inference times often exceeding thousands of seconds per scan. To overcome this barrier, we introduce MAN, a Latent Diffusion Enhanced Multistage Anti-Noise Network for Efficient and High-Quality Low-Dose CT Image Denoising task. Our method operates in a compressed latent space via a perceptually-optimized autoencoder, enabling an attention-based conditional U-Net to perform the fast, deterministic conditional denoising diffusion process with drastically reduced overhead. On the LDCT and Projection dataset, our model achieves superior perceptual quality, surpassing CNN/GAN-based methods while rivaling the reconstruction fidelity of computationally heavy diffusion models like DDPM and Dn-Dp. Most critically, in the inference stage, our model is over 60x faster than representative pixel space diffusion denoisers, while remaining competitive on PSNR/SSIM scores. By bridging the gap between high fidelity and clinical viability, our work demonstrates a practical path forward for advanced generative models in medical imaging.

Ultra-low-field magnetic resonance imaging (ULF-MRI), operating below 0.2 Tesla, is gaining renewed interest as a re-emerging diagnostic modality in a field dominated by high- and ultra-high-field systems. Recent advances in magnet design, RF coils, pulse sequences, and AI-based reconstruction have significantly enhanced image quality, mitigating traditional limitations such as low signal- and contrast-to-noise ratio and reduced spatial resolution. ULF-MRI offers distinct advantages: reduced susceptibility artifacts, safer imaging in patients with metallic implants, low power consumption, and true portability for point-of-care use. This narrative review synthesizes the physical foundations, technological advances, and emerging clinical applications of ULF-MRI. A focused literature search across PubMed, Scopus, IEEE Xplore, and Google Scholar was conducted up to August 11, 2025, using combined keywords targeting hardware, software, and clinical domains. Inclusion emphasized scientific rigor and thematic relevance. A comparative analysis with other imaging modalities highlights the specific niche ULF-MRI occupies within the broader diagnostic landscape. Future directions and challenges for clinical translation are explored. In a world increasingly polarized between the push for ultra-high-field excellence and the need for accessible imaging, ULF-MRI embodies a modern "David versus Goliath" theme, offering a sustainable, democratizing force capable of expanding MRI access to anyone, anywhere.

To evaluate the image quality and clinical utility of ultra-fast T2-weighted imaging (UF-T2WI), which acquires all slice data in 7 s using a single-shot turbo spin-echo technique combined with dual-type deep learning (DL) reconstruction, incorporating DL-based image denoising and super-resolution processing, by comparing UF-T2WI with conventional T2WI. We analyzed data from 38 patients who underwent both conventional T2WI and UF-T2WI with the dual-type DL-based image reconstruction. Two board-certified radiologists independently performed blinded qualitative assessments of the patients' images obtained with UF-T2WI with DL and conventional T2WI, evaluating the overall image quality, anatomical structure visibility, and levels of noise and artifacts. In cases that included central nervous system diseases, the lesions' delineation was also assessed. The quantitative analysis included measurements of signal-to-noise ratios in white and gray matter and the contrast-to-noise ratio between gray and white matter. Compared to conventional T2WI, UF-T2WI with DL received significantly higher ratings for overall image quality and lower noise and artifact levels (p < 0.001 for both readers). The anatomical visibility was significantly better in UF-T2WI for one reader, with no significant difference for the other reader. The lesion visibility in UF-T2WI was comparable to that in conventional T2WI. Quantitatively, the SNRs and CNRs were all significantly higher in UF-T2WI than conventional T2WI (p < 0.001). The combination of SSTSE with dual-type DL reconstruction allows for the acquisition of clinically acceptable T2WI images in just 7 s. This technique shows strong potential to reduce MRI scan times and improve clinical workflow efficiency.