Cone-beam computed tomography (CBCT) is widely used for image-guided radiotherapy (IGRT). It provides real time visualization at low cost and dose. However, photon scattering and beam hindrance cause artifacts in CBCT. These include inaccurate Hounsfield Units (HU), reducing reliability for dose calculation, and adaptive planning. By contrast, computed tomography (CT) offers better image quality and accurate HU calibration but is usually acquired offline and fails to capture intra-treatment anatomical changes. Thus, accurate CBCT-to-CT synthesis is needed to close the imaging-quality gap in adaptive radiotherapy workflows. To cater to this, we propose a novel diffusion-based conditional generative model, coined EqDiff-CT, to synthesize high-quality CT images from CBCT. EqDiff-CT employs a denoising diffusion probabilistic model (DDPM) to iteratively inject noise and learn latent representations that enable reconstruction of anatomically consistent CT images. A group-equivariant conditional U-Net backbone, implemented with e2cnn steerable layers, enforces rotational equivariance (cyclic C4 symmetry), helping preserve fine structural details while minimizing noise and artifacts. The system was trained and validated on the SynthRAD2025 dataset, comprising CBCT-CT scans across multiple head-and-neck anatomical sites, and we compared it with advanced methods such as CycleGAN and DDPM. EqDiff-CT provided substantial gains in structural fidelity, HU accuracy and quantitative metrics. Visual findings further confirm the improved recovery, sharper soft tissue boundaries, and realistic bone reconstructions. The findings suggest that the diffusion model has offered a robust and generalizable framework for CBCT improvements. The proposed solution helps in improving the image quality as well as the clinical confidence in the CBCT-guided treatment planning and dose calculations.

Accurate and interpretable survival analysis remains a core challenge in oncology. With growing multimodal data and the clinical need for transparent models to support validation and trust, this challenge increases in complexity. We propose an interpretable multimodal AI framework to automate survival analysis by integrating clinical variables and computed tomography imaging. Our MultiFIX-based framework uses deep learning to infer survival-relevant features that are further explained: imaging features are interpreted via Grad-CAM, while clinical variables are modeled as symbolic expressions through genetic programming. Risk estimation employs a transparent Cox regression, enabling stratification into groups with distinct survival outcomes. Using the open-source RADCURE dataset for head and neck cancer, MultiFIX achieves a C-index of 0.838 (prediction) and 0.826 (stratification), outperforming the clinical and academic baseline approaches and aligning with known prognostic markers. These results highlight the promise of interpretable multimodal AI for precision oncology with MultiFIX.

Computed tomography (CT) is one of the most widely used non-invasive imaging modalities for medical diagnosis. In clinical practice, CT images are usually acquired with large slice thicknesses due to the high cost of memory storage and operation time, resulting in an anisotropic CT volume with much lower inter-slice resolution than in-plane resolution. Since such inconsistent resolution may lead to difficulties in disease diagnosis, deep learning-based volumetric super-resolution methods have been developed to improve inter-slice resolution. Most existing methods conduct single-image super-resolution on the through-plane or synthesize intermediate slices from adjacent slices; however, the anisotropic characteristic of 3D CT volume has not been well explored. In this paper, we propose a novel cross-view texture transfer approach for CT slice interpolation by fully utilizing the anisotropic nature of 3D CT volume. Specifically, we design a unique framework that takes high-resolution in-plane texture details as a reference and transfers them to low-resolution through-plane images. To this end, we introduce a multi-reference non-local attention module that extracts meaningful features for reconstructing through-plane high-frequency details from multiple in-plane images. Through extensive experiments, we demonstrate that our method performs significantly better in CT slice interpolation than existing competing methods on public CT datasets including a real-paired benchmark, verifying the effectiveness of the proposed framework. The source code of this work is available at https://github.com/khuhm/ACVTT.

Encoder-Decoder architectures are widely used in deep learning-based Deformable Image Registration (DIR), where the encoder extracts multi-scale features and the decoder predicts deformation fields by recovering spatial locations. However, current methods lack specialized extraction of features (that are useful for registration) and predict deformation jointly and homogeneously in all three directions. In this paper, we propose a novel expert-guided DIR network with Mixture of Experts (MoE) mechanism applied in both encoder and decoder, named SHMoAReg. Specifically, we incorporate Mixture of Attention heads (MoA) into encoder layers, while Spatial Heterogeneous Mixture of Experts (SHMoE) into the decoder layers. The MoA enhances the specialization of feature extraction by dynamically selecting the optimal combination of attention heads for each image token. Meanwhile, the SHMoE predicts deformation fields heterogeneously in three directions for each voxel using experts with varying kernel sizes. Extensive experiments conducted on two publicly available datasets show consistent improvements over various methods, with a notable increase from 60.58% to 65.58% in Dice score for the abdominal CT dataset. Furthermore, SHMoAReg enhances model interpretability by differentiating experts' utilities across/within different resolution layers. To the best of our knowledge, we are the first to introduce MoE mechanism into DIR tasks. The code will be released soon.

Managing scan protocols in Computed Tomography (CT), which includes adjusting acquisition parameters or configuring reconstructions, as well as selecting postprocessing tools in a patient-specific manner, is time-consuming and requires clinical as well as technical expertise. At the same time, we observe an increasing shortage of skilled workforce in radiology. To address this issue, a Large Language Model (LLM)-based agent framework is proposed to assist with the interpretation and execution of protocol configuration requests given in natural language or a structured, device-independent format, aiming to improve the workflow efficiency and reduce technologists' workload. The agent combines in-context-learning, instruction-following, and structured toolcalling abilities to identify relevant protocol elements and apply accurate modifications. In a systematic evaluation, experimental results indicate that the agent can effectively retrieve protocol components, generate device compatible protocol definition files, and faithfully implement user requests. Despite demonstrating feasibility in principle, the approach faces limitations regarding syntactic and semantic validity due to lack of a unified device API, and challenges with ambiguous or complex requests. In summary, the findings show a clear path towards LLM-based agents for supporting scan protocol management in CT imaging.

Background: Accurate and fast dose calculation is essential for optimizing carbon ion therapy. Existing machine learning (ML) models have been developed for other radiotherapy modalities. They use patient data with uniform CT imaging properties. Purpose: This study investigates the application of several ML models for physical dose calculation in carbon ion therapy and compares their ability to generalize to CT data with varying resolutions. Among the models examined is a Diffusion Model, which is tested for the first time for the calculation of physical dose distributions. Methods: A dataset was generated using publicly available CT images of the head and neck region. Monoenergetic carbon ion beams were simulated at various initial energies using Geant4 simulation software. A U-Net architecture was developed for dose prediction based on distributions of material density in patients and of absorbed dose in water. It was trained as a Generative Adversarial Network (GAN) generator, a Diffusion Model noise estimator, and as a standalone network. Their performances were compared with two models from literature. Results: All models produced dose distributions deviating by less than 2% from that obtained by a full Monte Carlo simulation, even for a patient not seen during training. Dose calculation time on a GPU was in the range of 3 ms to 15 s. The resource-efficient U-Net appears to perform comparably to the more computationally intensive GAN and Diffusion Model. Conclusion: This study demonstrates that ML models can effectively balance accuracy and speed for physical dose calculation in carbon ion therapy. Using the computationally efficient U-Net can help conserve resources. The generalizability of the models to different CT image resolutions enables the use for different patients without extensive retraining.

Accurate dose calculation on cone beam computed tomography (CBCT) images is essential for modern proton treatment planning workflows, particularly when accounting for inter-fractional anatomical changes in adaptive treatment scenarios. Traditional CBCT-based dose calculation suffers from image quality limitations, requiring complex correction workflows. This study develops and validates a deep learning approach for direct proton dose calculation from CBCT images using extended Long Short-Term Memory (xLSTM) neural networks. A retrospective dataset of 40 head-and-neck cancer patients with paired planning CT and treatment CBCT images was used to train an xLSTM-based neural network (CBCT-NN). The architecture incorporates energy token encoding and beam's-eye-view sequence modelling to capture spatial dependencies in proton dose deposition patterns. Training utilized 82,500 paired beam configurations with Monte Carlo-generated ground truth doses. Validation was performed on 5 independent patients using gamma analysis, mean percentage dose error assessment, and dose-volume histogram comparison. The CBCT-NN achieved gamma pass rates of 95.1 $\pm$ 2.7% using 2mm/2% criteria. Mean percentage dose errors were 2.6 $\pm$ 1.4% in high-dose regions ($>$90% of max dose) and 5.9 $\pm$ 1.9% globally. Dose-volume histogram analysis showed excellent preservation of target coverage metrics (Clinical Target Volume V95% difference: -0.6 $\pm$ 1.1%) and organ-at-risk constraints (parotid mean dose difference: -0.5 $\pm$ 1.5%). Computation time is under 3 minutes without sacrificing Monte Carlo-level accuracy. This study demonstrates the proof-of-principle of direct CBCT-based proton dose calculation using xLSTM neural networks. The approach eliminates traditional correction workflows while achieving comparable accuracy and computational efficiency suitable for adaptive protocols.

Objective: Cone-beam computed tomography (CBCT) provides a low-dose imaging alternative to conventional CT, but suffers from noise, scatter, and artifacts that degrade image quality. Synthetic CT (sCT) aims to translate CBCT to high-quality CT-like images for improved anatomical accuracy and dosimetric precision. Although deep learning approaches have shown promise, they often face limitations in generalizability and detail preservation. Conditional diffusion models (CDMs), with their iterative refinement process, offers a novel solution. This review systematically examines the use of CDMs for CBCT-to-sCT synthesis. Methods: A systematic search was conducted in Web of Science, Scopus, and Google Scholar for studies published between 2013 and 2024. Inclusion criteria targeted works employing conditional diffusion models specifically for sCT generation. Eleven relevant studies were identified and analyzed to address three questions: (1) What conditional diffusion methods are used? (2) How do they compare to conventional deep learning in accuracy? (3) What are their clinical implications? Results: CDMs incorporating anatomical priors and spatial-frequency features demonstrated improved structural preservation and noise robustness. Energy-guided and hybrid latent models enabled enhanced dosimetric accuracy and personalized image synthesis. Across studies, CDMs consistently outperformed traditional deep learning models in noise suppression and artefact reduction, especially in challenging cases like lung imaging and dual-energy CT. Conclusion: Conditional diffusion models show strong potential for generalized, accurate sCT generation from CBCT. However, clinical adoption remains limited. Future work should focus on scalability, real-time inference, and integration with multi-modal imaging to enhance clinical relevance.

As medical diagnoses increasingly leverage multimodal data, machine learning models are expected to effectively fuse heterogeneous information while remaining robust to missing modalities. In this work, we propose a novel multimodal learning framework that integrates enhanced modalities dropout and contrastive learning to address real-world limitations such as modality imbalance and missingness. Our approach introduces learnable modality tokens for improving missingness-aware fusion of modalities and augments conventional unimodal contrastive objectives with fused multimodal representations. We validate our framework on large-scale clinical datasets for disease detection and prediction tasks, encompassing both visual and tabular modalities. Experimental results demonstrate that our method achieves state-of-the-art performance, particularly in challenging and practical scenarios where only a single modality is available. Furthermore, we show its adaptability through successful integration with a recent CT foundation model. Our findings highlight the effectiveness, efficiency, and generalizability of our approach for multimodal learning, offering a scalable, low-cost solution with significant potential for real-world clinical applications. The code is available at https://github.com/omron-sinicx/medical-modality-dropout.

This study evaluates publicly available deep-learning based lung segmentation models in transplant-eligible patients to determine their performance across disease severity levels, pathology categories, and lung sides, and to identify limitations impacting their use in preoperative planning in lung transplantation. This retrospective study included 32 patients who underwent chest CT scans at Duke University Health System between 2017 and 2019 (total of 3,645 2D axial slices). Patients with standard axial CT scans were selected based on the presence of two or more lung pathologies of varying severity. Lung segmentation was performed using three previously developed deep learning models: Unet-R231, TotalSegmentator, MedSAM. Performance was assessed using quantitative metrics (volumetric similarity, Dice similarity coefficient, Hausdorff distance) and a qualitative measure (four-point clinical acceptability scale). Unet-R231 consistently outperformed TotalSegmentator and MedSAM in general, for different severity levels, and pathology categories (p<0.05). All models showed significant performance declines from mild to moderate-to-severe cases, particularly in volumetric similarity (p<0.05), without significant differences among lung sides or pathology types. Unet-R231 provided the most accurate automated lung segmentation among evaluated models with TotalSegmentator being a close second, though their performance declined significantly in moderate-to-severe cases, emphasizing the need for specialized model fine-tuning in severe pathology contexts.