Ultrasound (US) imaging is increasingly used in spinal procedures due to its real-time, radiation-free capabilities; however, its effectiveness is hindered by shadowing artifacts that obscure deeper tissue structures. Traditional approaches, such as CT-to-US registration, incorporate anatomical information from preoperative CT scans to guide interventions, but they are limited by complex registration requirements, differences in spine curvature, and the need for recent CT imaging. Recent shape completion methods can offer an alternative by reconstructing spinal structures in US data, while being pretrained on large set of publicly available CT scans. However, these approaches are typically offline and have limited reproducibility. In this work, we introduce a novel integrated system that combines robotic ultrasound with real-time shape completion to enhance spinal visualization. Our robotic platform autonomously acquires US sweeps of the lumbar spine, extracts vertebral surfaces from ultrasound, and reconstructs the complete anatomy using a deep learning-based shape completion network. This framework provides interactive, real-time visualization with the capability to autonomously repeat scans and can enable navigation to target locations. This can contribute to better consistency, reproducibility, and understanding of the underlying anatomy. We validate our approach through quantitative experiments assessing shape completion accuracy and evaluations of multiple spine acquisition protocols on a phantom setup. Additionally, we present qualitative results of the visualization on a volunteer scan.

Accurate segmentation of femur structures from Magnetic Resonance Imaging (MRI) is critical for orthopedic diagnosis and surgical planning but remains challenging due to the limitations of existing 2D and 3D deep learning-based segmentation approaches. In this study, we propose XAG-Net, a novel 2.5D U-Net-based architecture that incorporates pixel-wise cross-slice attention (CSA) and skip attention gating (AG) mechanisms to enhance inter-slice contextual modeling and intra-slice feature refinement. Unlike previous CSA-based models, XAG-Net applies pixel-wise softmax attention across adjacent slices at each spatial location for fine-grained inter-slice modeling. Extensive evaluations demonstrate that XAG-Net surpasses baseline 2D, 2.5D, and 3D U-Net models in femur segmentation accuracy while maintaining computational efficiency. Ablation studies further validate the critical role of the CSA and AG modules, establishing XAG-Net as a promising framework for efficient and accurate femur MRI segmentation.

To treat Trochlear Dysplasia (TD), current approaches rely mainly on low-resolution clinical Magnetic Resonance (MR) scans and surgical intuition. The surgeries are planned based on surgeons experience, have limited adoption of minimally invasive techniques, and lead to inconsistent outcomes. We propose a pipeline that generates super-resolved, patient-specific 3D pseudo-healthy target morphologies from conventional clinical MR scans. First, we compute an isotropic super-resolved MR volume using an Implicit Neural Representation (INR). Next, we segment femur, tibia, patella, and fibula with a multi-label custom-trained network. Finally, we train a Wavelet Diffusion Model (WDM) to generate pseudo-healthy target morphologies of the trochlear region. In contrast to prior work producing pseudo-healthy low-resolution 3D MR images, our approach enables the generation of sub-millimeter resolved 3D shapes compatible for pre- and intraoperative use. These can serve as preoperative blueprints for reshaping the femoral groove while preserving the native patella articulation. Furthermore, and in contrast to other work, we do not require a CT for our pipeline - reducing the amount of radiation. We evaluated our approach on 25 TD patients and could show that our target morphologies significantly improve the sulcus angle (SA) and trochlear groove depth (TGD). The code and interactive visualization are available at https://wehrlimi.github.io/sr-3d-planning/.

Distal myopathy represents a genetically heterogeneous group of skeletal muscle disorders with broad clinical manifestations, posing diagnostic challenges in radiology. To address this, we propose a novel multimodal attention-aware fusion architecture that combines features extracted from two distinct deep learning models, one capturing global contextual information and the other focusing on local details, representing complementary aspects of the input data. Uniquely, our approach integrates these features through an attention gate mechanism, enhancing both predictive performance and interpretability. Our method achieves a high classification accuracy on the BUSI benchmark and a proprietary distal myopathy dataset, while also generating clinically relevant saliency maps that support transparent decision-making in medical diagnosis. We rigorously evaluated interpretability through (1) functionally grounded metrics, coherence scoring against reference masks and incremental deletion analysis, and (2) application-grounded validation with seven expert radiologists. While our fusion strategy boosts predictive performance relative to single-stream and alternative fusion strategies, both quantitative and qualitative evaluations reveal persistent gaps in anatomical specificity and clinical usefulness of the interpretability. These findings highlight the need for richer, context-aware interpretability methods and human-in-the-loop feedback to meet clinicians' expectations in real-world diagnostic settings.

Early and accurate detection of the bone fracture is paramount to initiating treatment as early as possible and avoiding any delay in patient treatment and outcomes. Interpretation of X-ray image is a time consuming and error prone task, especially when resources for such interpretation are limited by lack of radiology expertise. Additionally, deep learning approaches used currently, typically suffer from misclassifications and lack interpretable explanations to clinical use. In order to overcome these challenges, we propose an automated framework of bone fracture detection using a VGG-19 model modified to our needs. It incorporates sophisticated preprocessing techniques that include Contrast Limited Adaptive Histogram Equalization (CLAHE), Otsu's thresholding, and Canny edge detection, among others, to enhance image clarity as well as to facilitate the feature extraction. Therefore, we use Grad-CAM, an Explainable AI method that can generate visual heatmaps of the model's decision making process, as a type of model interpretability, for clinicians to understand the model's decision making process. It encourages trust and helps in further clinical validation. It is deployed in a real time web application, where healthcare professionals can upload X-ray images and get the diagnostic feedback within 0.5 seconds. The performance of our modified VGG-19 model attains 99.78\% classification accuracy and AUC score of 1.00, making it exceptionally good. The framework provides a reliable, fast, and interpretable solution for bone fracture detection that reasons more efficiently for diagnoses and better patient care.

The growing volume of medical imaging data has increased the need for automated diagnostic tools, especially for musculoskeletal injuries like rib fractures, commonly detected via CT scans. Manual interpretation is time-consuming and error-prone. We propose OrthoInsight, a multi-modal deep learning framework for rib fracture diagnosis and report generation. It integrates a YOLOv9 model for fracture detection, a medical knowledge graph for retrieving clinical context, and a fine-tuned LLaVA language model for generating diagnostic reports. OrthoInsight combines visual features from CT images with expert textual data to deliver clinically useful outputs. Evaluated on 28,675 annotated CT images and expert reports, it achieves high performance across Diagnostic Accuracy, Content Completeness, Logical Coherence, and Clinical Guidance Value, with an average score of 4.28, outperforming models like GPT-4 and Claude-3. This study demonstrates the potential of multi-modal learning in transforming medical image analysis and providing effective support for radiologists.

Scoliosis affects roughly 2 to 4 percent of adolescents, and treatment decisions depend on precise Cobb angle measurement. Manual assessment is time consuming and subject to inter observer variation. We conducted a retrospective, multi centre evaluation of a fully automated deep learning software (Carebot AI Bones, Spine Measurement functionality; Carebot s.r.o.) on 103 standing anteroposterior whole spine radiographs collected from ten hospitals. Two musculoskeletal radiologists independently measured each study and served as reference readers. Agreement between the AI and each radiologist was assessed with Bland Altman analysis, mean absolute error (MAE), root mean squared error (RMSE), Pearson correlation coefficient, and Cohen kappa for four grade severity classification. Against Radiologist 1 the AI achieved an MAE of 3.89 degrees (RMSE 4.77 degrees) with a bias of 0.70 degrees and limits of agreement from minus 8.59 to plus 9.99 degrees. Against Radiologist 2 the AI achieved an MAE of 3.90 degrees (RMSE 5.68 degrees) with a bias of 2.14 degrees and limits from minus 8.23 to plus 12.50 degrees. Pearson correlations were r equals 0.906 and r equals 0.880 (inter reader r equals 0.928), while Cohen kappa for severity grading reached 0.51 and 0.64 (inter reader kappa 0.59). These results demonstrate that the proposed software reproduces expert level Cobb angle measurements and categorical grading across multiple centres, suggesting its utility for streamlining scoliosis reporting and triage in clinical workflows.

Background: Shoulder fractures are often underdiagnosed, especially in emergency and high-volume clinical settings. Studies report up to 10% of such fractures may be missed by radiologists. AI-driven tools offer a scalable way to assist early detection and reduce diagnostic delays. We address this gap through a dedicated AI system for shoulder radiographs. Methods: We developed a multi-model deep learning system using 10,000 annotated shoulder X-rays. Architectures include Faster R-CNN (ResNet50-FPN, ResNeXt), EfficientDet, and RF-DETR. To enhance detection, we applied bounding box and classification-level ensemble techniques such as Soft-NMS, WBF, and NMW fusion. Results: The NMW ensemble achieved 95.5% accuracy and an F1-score of 0.9610, outperforming individual models across all key metrics. It demonstrated strong recall and localization precision, confirming its effectiveness for clinical fracture detection in shoulder X-rays. Conclusion: The results show ensemble-based AI can reliably detect shoulder fractures in radiographs with high clinical relevance. The model's accuracy and deployment readiness position it well for integration into real-time diagnostic workflows. The current model is limited to binary fracture detection, reflecting its design for rapid screening and triage support rather than detailed orthopedic classification.

Medical Imagings are considered one of the crucial diagnostic tools for different bones-related diseases, especially bones fractures. This paper investigates the robustness of pre-trained deep learning models for classifying bone fractures in X-ray images and seeks to address global healthcare disparity through the lens of technology. Three deep learning models have been tested under varying simulated equipment quality conditions. ResNet50, VGG16 and EfficientNetv2 are the three pre-trained architectures which are compared. These models were used to perform bone fracture classification as images were progressively degraded using noise. This paper specifically empirically studies how the noise can affect the bone fractures detection and how the pre-trained models performance can be changes due to the noise that affect the quality of the X-ray images. This paper aims to help replicate real world challenges experienced by medical imaging technicians across the world. Thus, this paper establishes a methodological framework for assessing AI model degradation using transfer learning and controlled noise augmentation. The findings provide practical insight into how robust and generalizable different pre-trained deep learning powered computer vision models can be when used in different contexts.

Radiographic images are a cornerstone of medical diagnostics in orthopaedics, with anatomical landmark detection serving as a crucial intermediate step for information extraction. General-purpose foundational segmentation models, such as SAM (Segment Anything Model), do not support landmark segmentation out of the box and require prompts to function. However, in medical imaging, the prompts for landmarks are highly specific. Since SAM has not been trained to recognize such landmarks, it cannot generate accurate landmark segmentations for diagnostic purposes. Even MedSAM, a medically adapted variant of SAM, has been trained to identify larger anatomical structures, such as organs and their parts, and lacks the fine-grained precision required for orthopaedic pelvic landmarks. To address this limitation, we propose leveraging another general-purpose, non-foundational model: YOLO. YOLO excels in object detection and can provide bounding boxes that serve as input prompts for SAM. While YOLO is efficient at detection, it is significantly outperformed by SAM in segmenting complex structures. In combination, these two models form a reliable pipeline capable of segmenting not only a small pilot set of eight anatomical landmarks but also an expanded set of 72 landmarks and 16 regions with complex outlines, such as the femoral cortical bone and the pelvic inlet. By using YOLO-generated bounding boxes to guide SAM, we trained the hybrid model to accurately segment orthopaedic pelvic radiographs. Our results show that the proposed combination of YOLO and SAM yields excellent performance in detecting anatomical landmarks and intricate outlines in orthopaedic pelvic radiographs.