Cerebrovascular accident (CVA), commonly known as stroke, stands as a significant contributor to contemporary mortality and morbidity rates, often leading to lasting disabilities. Early identification is crucial in mitigating its impact and reducing mortality. Non-contrast computed tomography (NCCT) remains the primary diagnostic tool in stroke emergencies due to its speed, accessibility, and cost-effectiveness. NCCT enables the exclusion of hemorrhage and directs attention to ischemic causes resulting from arterial flow obstruction. Quantification of NCCT findings employs the Alberta Stroke Program Early Computed Tomography Score (ASPECTS), which evaluates affected brain structures. This study seeks to identify early alterations in NCCT density in patients with stroke symptoms using a binary classifier distinguishing NCCT scans with and without stroke. To achieve this, various well-known deep learning architectures, namely VGG3D, ResNet3D, and DenseNet3D, validated in the ImageNet challenges, are implemented with 3D images covering the entire brain volume. The training results of these networks are presented, wherein diverse parameters are examined for optimal performance. The DenseNet3D network emerges as the most effective model, attaining a training set accuracy of 98% and a test set accuracy of 95%. The aim is to alert medical professionals to potential stroke cases in their early stages based on NCCT findings displaying altered density patterns.

Intracerebral haemorrhage (ICH) is a common form of stroke that affects millions of people worldwide. The incidence is associated with a high rate of mortality and morbidity. Accurate diagnosis using brain non-contrast computed tomography (NCCT) is crucial for decision-making on potentially life-saving surgery. Limited access to expert readers and inter-observer variability imposes barriers to timeous and accurate ICH diagnosis. We proposed a hybrid deep learning model for automated ICH diagnosis using NCCT images, which comprises a convolutional autoencoder (CAE) to extract features with reduced data dimensionality and a dense neural network (DNN) for classification. In order to ensure that the model generalizes to new data, we trained it using tenfold cross-validation and holdout methods. Principal component analysis (PCA) based dimensionality reduction and classification is systematically implemented for comparison. The study dataset comprises 1645 ("ICH" class) and 1648 ("Normal" class belongs to patients with non-hemorrhagic stroke) labelled images obtained from 108 patients, who had undergone CT examination on a 64-slice computed tomography scanner at Kalinga Institute of Medical Sciences between 2020 and 2023. Our developed CAE-DNN hybrid model attained 99.84% accuracy, 99.69% sensitivity, 100% specificity, 100% precision, and 99.84% F1-score, which outperformed the comparator PCA-DNN model as well as the published results in the literature. In addition, using saliency maps, our CAE-DNN model can highlight areas on the images that are closely correlated with regions of ICH, which have been manually contoured by expert readers. The CAE-DNN model demonstrates the proof-of-concept for accurate ICH detection and localization, which can potentially be implemented to prioritize the treatment using NCCT images in clinical settings.

State-of-the-art computer- and robot-assisted surgery systems rely on intraoperative imaging technologies such as computed tomography and fluoroscopy to provide detailed 3D visualizations of patient anatomy. However, these methods expose both patients and clinicians to ionizing radiation. This study introduces a radiation-free approach for 3D spine reconstruction using RGB-D data. Inspired by the "mental map" surgeons form during procedures, we present SurgPointTransformer, a shape completion method that reconstructs unexposed spinal regions from sparse surface observations. The method begins with a vertebra segmentation step that extracts vertebra-level point clouds for subsequent shape completion. SurgPointTransformer then uses an attention mechanism to learn the relationship between visible surface features and the complete spine structure. The approach is evaluated on an <i>ex vivo</i> dataset comprising nine samples, with CT-derived data used as ground truth. SurgPointTransformer significantly outperforms state-of-the-art baselines, achieving a Chamfer distance of 5.39 mm, an F-score of 0.85, an Earth mover's distance of 11.00 and a signal-to-noise ratio of 22.90 dB. These results demonstrate the potential of our method to reconstruct 3D vertebral shapes without exposing patients to ionizing radiation. This work contributes to the advancement of computer-aided and robot-assisted surgery by enhancing system perception and intelligence.

The development of the Artificial Intelligence (AI)-based severity inspection model for ankylosing spondylitis (AS) could support health professionals to rapidly assess the severity of the disease, enhance proficiency, and reduce the demands of human resources. This paper aims to develop an AI-based severity inspection model for AS using patients' X-ray images and modified Stoke Ankylosing Spondylitis Spinal Score (mSASSS). The numerical simulation with AI is developed following the progress of data preprocessing, building and testing the model, and then the model. The training data is preprocessed by inviting three experts to check the X-ray images of 222 patients following the Gold Standard. The model is then developed through two stages, including keypoint detection and mSASSS evaluation. The two-stage AI-based severity inspection model for AS was developed to automatically detect spine points and evaluate mSASSS scores. At last, the data obtained from the developed model was compared with those from experts' assessment to analyse the accuracy of the model. The study was conducted in accordance with the ethical principles outlined in the Declaration of Helsinki. The spine point detection at the first stage achieved 1.57 micrometres in mean error distance with the ground truth, and the second stage of the classification network can reach 0.81 in mean accuracy. The model can correctly identify 97.4% patches belonging to mSASSS score 3, while those belonging to score 0 can still be classified into scores 1 or 2. The automatic severity inspection model for AS developed in this paper is accurate and can support health professionals in rapidly assessing the severity of AS, enhancing assessment proficiency, and reducing the demands of human resources.

Accurately predicting hematoma enlargement (HE) is crucial for improving the prognosis of patients with cerebral haemorrhage. Artificial intelligence (AI) is a potentially reliable assistant for medical image recognition. This study systematically reviews medical imaging articles on the predictive performance of AI in HE. Retrieved relevant studies published before October, 2024 from Embase, Institute of Electrical and Electronics Engineers (IEEE), PubMed, Web of Science, and Cochrane Library databases. The diagnostic test of predicting hematoma enlargement based on CT image training artificial intelligence model, and reported 2 × 2 contingency tables or provided sensitivity (SE) and specificity (SP) for calculation. Two reviewers independently screened the retrieved citations and extracted data. The methodological quality of studies was assessed using the QUADAS-AI, and Preferred Reporting Items for Systematic reviews and Meta-Analyses was used to ensure standardised reporting of studies. Subgroup analysis was performed based on sample size, risk of bias, year of publication, ratio of training set to test set, and number of centres involved. 36 articles were included in this Systematic review to qualitative analysis, of which 23 have sufficient information for further quantitative analysis. Among these articles, there are a total of 7 articles used deep learning (DL) and 16 articles used machine learning (ML). The comprehensive SE and SP of ML are 78% (95% CI: 69-85%) and 85% (78-90%), respectively, while the AUC is 0.89 (0.86-0.91). The SE and SP of DL was 87% (95% CI: 80-92%) and 75% (67-81%), respectively, with an AUC of 0.88 (0.85-0.91). The subgroup analysis found that when the ratio of the training set to the test set is 7:3, the sensitivity is 0.77(0.62-0.91), <i>p</i> = 0.03; In terms of specificity, the group with sample size more than 200 has higher specificity, which is 0.83 (0.75-0.92), <i>p</i> = 0.02; among the risk groups in the study design, the specificity of the risk group was higher, which was 0.83 (0.76-0.89), <i>p</i> = 0.02. The group specificity of articles published before 2021 was higher, 0.84 (0.77-0.90); and the specificity of data from a single research centre was higher, which was 0.85 (0.80-0.91), <i>p</i> < 0.001. Artificial intelligence algorithms based on imaging have shown good performance in predicting HE.

We propose and evaluate multimodal deep learning (DL) approaches that combine ultrasound (US) B-mode and Nakagami parametric images for breast tumor classification. It is hypothesized that integrating tissue brightness information from B-mode images with scattering properties from Nakagami images will enhance diagnostic performance compared with single-input approaches. An EfficientNetV2B0 network was used to develop multimodal DL frameworks that took as input (i) numerical two-dimensional (2D) maps or (ii) rendered red-green-blue (RGB) representations of both B-mode and Nakagami data. The diagnostic performance of these frameworks was compared with single-input counterparts using 831 US acquisitions from 264 patients. In addition, gradient-weighted class activation mapping was applied to evaluate diagnostically relevant information utilized by the different networks. The multimodal architectures demonstrated significantly higher area under the receiver operating characteristic curve (AUC) values ( <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>p</mi> <mo><</mo> <mn>0.05</mn></mrow> </math> ) than their monomodal counterparts, achieving an average improvement of 10.75%. In addition, the multimodal networks incorporated, on average, 15.70% more diagnostically relevant tissue information. Among the multimodal models, those using RGB representations as input outperformed those that utilized 2D numerical data maps ( <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>p</mi> <mo><</mo> <mn>0.05</mn></mrow> </math> ). The top-performing multimodal architecture achieved a mean AUC of 0.896 [95% confidence interval (CI): 0.813 to 0.959] when performance was assessed at the image level and 0.848 (95% CI: 0.755 to 0.903) when assessed at the lesion level. Incorporating B-mode and Nakagami information together in a multimodal DL framework improved classification outcomes and increased the amount of diagnostically relevant information accessed by networks, highlighting the potential for automating and standardizing US breast cancer diagnostics to enhance clinical outcomes.

Breast cancer risk depends on an accurate assessment of breast density due to lesion masking. Although governed by standardized guidelines, radiologist assessment of breast density is still highly variable. Automated breast density assessment tools leverage deep learning but are limited by model robustness and interpretability. We assessed the robustness of a feature selection methodology (RFE-SHAP) for classifying breast density grades using tissue-specific radiomic features extracted from raw central projections of digital breast tomosynthesis screenings ( <math xmlns="http://www.w3.org/1998/Math/MathML"> <mrow> <msub><mrow><mi>n</mi></mrow> <mrow><mi>I</mi></mrow> </msub> <mo>=</mo> <mn>651</mn></mrow> </math> , <math xmlns="http://www.w3.org/1998/Math/MathML"> <mrow> <msub><mrow><mi>n</mi></mrow> <mrow><mi>II</mi></mrow> </msub> <mo>=</mo> <mn>100</mn></mrow> </math> ). RFE-SHAP leverages traditional and explainable AI methods to identify highly predictive and influential features. A simple logistic regression (LR) classifier was used to assess classification performance, and unsupervised clustering was employed to investigate the intrinsic separability of density grade classes. LR classifiers yielded cross-validated areas under the receiver operating characteristic (AUCs) per density grade of [ <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>A</mi></mrow> </math> : <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mn>0.909</mn> <mo>±</mo> <mn>0.032</mn></mrow> </math> , <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>B</mi></mrow> </math> : <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mn>0.858</mn> <mo>±</mo> <mn>0.027</mn></mrow> </math> , <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>C</mi></mrow> </math> : <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mn>0.927</mn> <mo>±</mo> <mn>0.013</mn></mrow> </math> , <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>D</mi></mrow> </math> : <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mn>0.890</mn> <mo>±</mo> <mn>0.089</mn></mrow> </math> ] and an AUC of <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mn>0.936</mn> <mo>±</mo> <mn>0.016</mn></mrow> </math> for classifying patients as nondense or dense. In external validation, we observed per density grade AUCs of [ <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>A</mi></mrow> </math> : 0.880, <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>B</mi></mrow> </math> : 0.779, <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>C</mi></mrow> </math> : 0.878, <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mi>D</mi></mrow> </math> : 0.673] and nondense/dense AUC of 0.823. Unsupervised clustering highlighted the ability of these features to characterize different density grades. Our RFE-SHAP feature selection methodology for classifying breast tissue density generalized well to validation datasets after accounting for natural class imbalance, and the identified radiomic features properly captured the progression of density grades. Our results potentiate future research into correlating selected radiomic features with clinical descriptors of breast tissue density.

The accurate assessment of computed tomography (CT) image quality is crucial for ensuring diagnostic reliability while minimizing radiation dose. Radiologists' evaluations are time-consuming and labor-intensive. Existing automated approaches often require large CT datasets with predefined image quality assessment (IQA) scores, which often do not align well with clinical evaluations. We aim to develop a reference-free, automated method for CT IQA that closely reflects radiologists' evaluations, reducing the dependency on large annotated datasets. We propose Task-Focused Knowledge Transfer (TFKT), a deep learning-based IQA method leveraging knowledge transfer from task-similar natural image datasets. TFKT incorporates a hybrid convolutional neural network-transformer model, enabling accurate quality predictions by learning from natural image distortions with human-annotated mean opinion scores. The model is pre-trained on natural image datasets and fine-tuned on low-dose computed tomography perceptual image quality assessment data to ensure task-specific adaptability. Extensive evaluations demonstrate that the proposed TFKT method effectively predicts IQA scores aligned with radiologists' assessments on in-domain datasets and generalizes well to out-of-domain clinical pediatric CT exams. The model achieves robust performance without requiring high-dose reference images. Our model is capable of assessing the quality of <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow><mo>∼</mo> <mn>30</mn></mrow> </math> CT image slices in a second. The proposed TFKT approach provides a scalable, accurate, and reference-free solution for CT IQA. The model bridges the gap between traditional and deep learning-based IQA, offering clinically relevant and computationally efficient assessments applicable to real-world clinical settings.

Retrospective single-institution study. To develop and validate an automated convolutional neural network (CNN) to measure the Cobb angle, T1 tilt angle, coronal balance, clavicular angle, height of the shoulders, T5-T12 Cobb angle, and sagittal balance for accurate scoliosis diagnosis. Scoliosis, characterized by a Cobb angle >10°, requires accurate and reliable measurements to guide treatment. Traditional manual measurements are time-consuming and have low interobserver and intraobserver reliability. While some automated tools exist, they often require manual intervention and focus primarily on the Cobb angle. In this study, we utilized four data sets comprising the anterior-posterior (AP) and lateral radiographs of 1682 patients with scoliosis. The CNN includes coarse segmentation, landmark localization, and fine segmentation. The measurements were evaluated using the dice coefficient, mean absolute error (MAE), and percentage of correct key-points (PCK) with a 3-mm threshold. An internal testing set, including 87 adolescent (7-16 yr) and 26 older adult patients (≥60 yr), was used to evaluate the agreement between automated and manual measurements. The automated measures by the CNN achieved high mean dice coefficients (>0.90), PCK of 89.7%-93.7%, and MAE for vertebral corners of 2.87-3.62 mm on AP radiographs. Agreement on the internal testing set for manual measurements was acceptable, with an MAE of 0.26 mm or degree-0.51 mm or degree for the adolescent subgroup and 0.29 mm or degree-4.93 mm or degree for the older adult subgroup on AP radiographs. The MAE for the T5-T12 Cobb angle and sagittal balance, on lateral radiographs, was 1.03° and 0.84 mm, respectively, in adolescents, and 4.60° and 9.41 mm, respectively, in older adults. Automated measurement time was significantly shorter compared with manual measurements. The deep learning automated system provides rapid, accurate, and reliable measurements for scoliosis diagnosis, which could improve clinical workflow efficiency and guide scoliosis treatment. Level III.

The study of biological age prediction using various biological data has been widely explored. However, single biological data may offer limited insights into the pathological process of aging and diseases. Here we evaluated the performance of machine learning models for biological age prediction by using the integrated features from multi-biological data of 140 healthy controls and 43 patients with schizophrenia, including brain MRI, gut microbiome, and blood data. Our results revealed that the models using multi-biological data achieved higher predictive accuracy than those using only brain MRI. Feature interpretability analysis of the optimal model elucidated that the substantial contributions of the frontal lobe, the temporal lobe and the fornix were effective for biological age prediction. Notably, patients with schizophrenia exhibited a pronounced increase in the predicted biological age gap (BAG) when compared to healthy controls. Moreover, the BAG in the SZ group was negatively and positively correlated with the MCCB and PANSS scores, respectively. These findings underscore the potential of BAG as a valuable biomarker for assessing cognitive decline and symptom severity of neuropsychiatric disorders.